hi
finally i get 113w with a 60 cm dish 
final elevation , its like 40 not 46 (for my antenna installation )
rf scan
which it is the user for root:ssh ? the same of web ?
saludos/ Cheers
Great. Well done. If you donāt mind, did you ever put your location into a pointing website? If so, what elevation did it recommend?
It will help me reconcile the various markings on different dishes, to true elevation angle.
hi
the dish is on the wall, not on the floor . and the wall its so badly done with mini mountains ā¦ I suppose that the base is not 90 Ā°
here a pic of the wall, and . put the base of the antena on the wall, was very difficultā¦
i use this 3 webs , on gps location of the dish
LIVE REAL TIME SATELLITE TRACKING AND PREDICTIONS: SATMEX 6 on gps location of the dish
http://www.dishpointer.com/
SatBeams - Satellite Coverage Maps - Sat Footprint Eutelsat 113 West A (E113WA, Satmex 6) / MexSat 2 (Morelos 3)
also use these tools
satmeter dvb-s/s2 ---- configure on 12,089/H/11,719
analog satfinder
saludos
Thatās a beautiful dish. 
SSH username/password are both outernet. The user account has sudo rights.
Good day to everyone,
We have good news. With the new dish we were able to recieve outernet without any problem!
Thank you for all the help.
3 Likes
hola
que bien felicitaciones
la seƱal no sube mas del 81 ? es raro que con 30 cm mas de plato solo suba el 10%, mi seƱal con uno de 60cm, ya hay seƱal pero tengo mis dudas si quedo bien afinada. pero quedo trabajando 
lo otro es que puedes actualizar tu lighthouse a la version 1.3.0
saludos
voy actualizar la version, ya veo que esta disponible la 1.4, muchas gracias por la ayuda. y revisarse haber si puedo afinarlo un poco mejor
@branko I wonder, the serial port is for configuration, or could i recieve some information through it?
@kalashnikov Wow! You rock. Did you license your video as Creative Commons? Because we may want to start using is for demos 
Another thing you beat us to: A receiver with a public IP. Iām building a solar install in the coming weeks, which Iāll be placing in a deserted area and assigning a public IP.
Iām surprised that your Lighthouse is not showing up under our status page: http://status.outernet.is/
By the way, if you would like to opt out of the status system, feel free to comment out that code.
Is there any content you would like us to send?
Serial gives you access to command line shell. Though, for some people (including me), it wasnāt interactive. So your mileage may vary.
hi
the video is now public domain, and photos to
the lighthouse Its behind a router and get private ip, but get acces to internet
i just use uplink.outernet.is to send some file, just waiting for something to happen
edit
if i can get this amateur radio news flow on outernet ā¦
What was the name of the file you sent?
Hello everyone! recently received my Lighthouse but I can not make it work, I wondered if any one can help a little with the setup? i live in Bogota
I am using a directv dish 60cm @jorge you find 70cm dish here in Colombia?
these two lnb try unsuccessfully
http://www.amazon.com/gp/product/B008NN83DW?psc=1&redirect=true&ref_=od_aui_detailpages02
http://www.amazon.com/gp/product/B005BQXL2W?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s01
Iām using this to point the dish
http://www.amazon.com/gp/product/B00NL4DYSC?psc=1&redirect=true&ref_=od_aui_detailpages02
@kalashnikov are you using any special paint to decorate the dish?
from already thank you very much, I love this project and I am glad that i am not the only one in Colombia!
For Bogota, supposedly the minimum suggested size is 65, but you probably want 70~90.
Carlos, i use the same sat finder. Do you see the bar graph changing as you try to point the dish?
I use a website to give me my approximate pointing direction, and find a landmark somewhere in the beam to point my dish at. I then use the sat finder to fine tune. I find that you can get a strong signal from the satellite next to the one you intend to look at.
If you do see a signal on the sat finder, your LNB is probably OK.
yo creo que no ha cazado ningun satelite antes
ese satfinder no lo he usado , prefiero el analogo
-uso del satfinder analogo
āse conecta adecuadamente el satfinder al lnb y el lighthouse, sin apuntar a ningun sat se pone en 5 la intensidad de ganancia, con la brujula y la elevaciĆ³n aproximada , a ojo se pone el plato sin ponerle atenciĆ³n al satfinder.
cuando crea tener la posiciĆ³n indicada trata de buscar seƱal con el satfinder, mueve muy sutilmente la antena hasta que note cambio en el tono y movimiento en la intensidad debe subir (en mi caso a 6 y despuĆ©s de afinar a 8), ya si despuĆ©s pego el satfinder digital para afinar el giro del lnb.
yo primero afino el eje horizontal y luego el vertical de la antena.
a los satfinder digitales se les puede poner los datos del tp para el saber si cazo el que es o no,
Frequency 12,089 MHz
Symbol Rate 11,719 kbaud
la antena si es de segunda debe estar bien, la concavidad pierde propiedades con la interperie, calor frio, eso va deformando el material.
creo que con platos de 45cm tmb se caza el 113w, no he probado
esos lnb son buenos y deben trabajar, el x2 no lo he usado nunca los televes son muy buenos pero uno de 0.1 noise seria mejor yo estoy probando estos [PLL][1]
[esta empresa en bogota][2] vende antenas de 60 65 70 75 y 90 , llame y pregunta, he comprado varias alla.
[mas][3]
el 113w no es un satelite falcil de cazar con antena de 60, pero si se puede cazar.
y la pintura es acrĆlico normal, que la antena este limpia para poder pintarlaā¦
saludos
[1]: http://www.amazon.com/Avenger-Universal-PLL322S-2-0-1dB-Noise/dp/B00AWHGYVK/ref=sr_1_7?s=electronics&ie=UTF8&qid=1446123756&sr=1-7&keywords=avenger+lnb
[2]: http://transmundial.com.co/product/antena-satelital-de-75-cms-con-lnb-ku-una-salida
[3]: http://piratas.cu.cc/doku.php?id=outernet:113w
branko tanks a lot i will try a big dish and fallow @JohnSpace instruccions!
@kalashnikov parcero muchas gracias por los datos, la verdad es que si soy muy novato en esto de satelites!! manana estare trepado al techo a ver si logro darle caceria al 113w, pero creo que va a ser mas facil comprar un disco mas grande, les estare contando
I have worked with the RxPi since November 2014, and have learned much. Now, my Lighthouse has arrived, and I am testing its performance.
Out of the box, Lighthouse sets up/connects within 5 minutes to a Ku Band antenna pointed to Galaxy 19. It is downloading about 1,000 articles per day plus the various Tweets at about 90 kps. I have been able to connect the Lighthouse in my house (100 meters away from my antenna) and receive signals 15 Signal Units lower than when connected directly at the base of my antenna (Signal level direct connect = 80, Signal level 100 meters away = 65 [whatever Signal level means]). I could not do this with the Geniatech receiver on my the Raspberry Pi running OrxPi v0.2.8 before.
The only issue on the Lighthouse is the external hard drive does not seem to work at all - - no file transferred after plug-in, and no recognition it is even connected. It is a 160 GB hard drive formated with a FAT32 properly named ext_store.
I hope this is useful to someone. Ken
1 Like
i plug a 64gb sd on EXT4 named EXT_STORE (caps on) ,on power off, them on , all the content fly away and starts from 0
also ask for the user password again and a new pin for recover password ā¦
1 Like