Réception Astra 3B

Bonjour et Bonne année 2020 à touts,
Je suis nouveau, Je viens de recevoir mon kit.
Je ne parviens pas à recevoir le satellite Astra 3B
J’ai bien respecté les information du site dishpointer.com

Your Location
Latitude: 48.2289°
Longitude: 2.1227°

Satellite Data
Name: 23.5E ASTRA 3B
Distance: 38536km
Dish Setup Data
Elevation: 30.9°
Azimuth (true): 152.3°
Azimuth (magn.): 151.7°
LNB Skew [?]: -10.5°

Es ce que Othernet fonctionne en France?
Et pouvez vous m’indiquer la configuration de la LNB dans skylark.

Je vous remercie par avance.


Hello and Happy New Year 2020 to all,
I am new, I just received my kit.
I cannot receive the Astra 3B satellite
I have respected the information on the dishpointer.com site

Your Location
Latitude: 48.2289 °
Longitude: 2.1227 °

Satellite Data
Name: 23.5E ASTRA 3B
Distance: 38536km
Dish Setup Data
Elevation: 30.9 °
Azimuth (true): 152.3 °
Azimuth (magn.): 151.7 °
LNB Skew [?]: -10.5 °

Does Othernet work in France?
And can you tell me the configuration of the LNB in ​​skylark.

I thank you in advance

Make sure you change your region to EU in the tuner app.

If you did you most likely you just have an alignment issue. The easiest method I have found is to use a compass app to point in the general direction (in your case 152 degrees) and then starting at the horizon slowly sweep back and forth a few degrees while raising elevation. Once you get close you will see data in the tuner status page, then fine tune for best snr.

There is always the possibility for obstructions. Something as little as a tree branch can cause problems.

If your still not finding signal check under log viewer/ diagnostics to see if your lnb is detected.

It should work in france, this is the position the integrated SatCalc app in skylark show for your position, just point the LNB to this position and take a look into the tuner app status:

Also please go in the Tuner App and set it to EU:

regards Manuel - DO5TY

Looking at https://status.othernet.is/ all receivers in europe are red in the framelock picture. I guess there is a general problem.

yeah you are right doh…seems like they just have a problem at the moment.

@Syed any Info on the EU Beam failure?

Merci pour vos réponses.
J’ai bien sélectionné EU.
Dans le diagnostic tout est OK.
Je suis bien à 152°E et élévation à 31°.

Je referais des essais demain, j’aurais plus de temps.
Je vous tiendrais informé.

Thank you for your answers.
I selected EU correctly.
In the diagnosis everything is OK.
I am well at 152 ° E and elevation at 31 °.

I would do tests tomorrow, I would have more time.
I will keep you informed.

@Tysonpower It’s back up now. Could you please confirm?

Jup all fine!

Bonjour,
Tout fonctionne correctement.
J’ai acheté une nouvelle tête LNB.
Celle livré avec le kit est défectueuse.

Merci à tous pour votre aide.
Je vais pouvoir regarder sa de plus prés.

Hello,
Everything is working properly.
I bought a new LNB head.
The one delivered with the kit is defective.

Thank you all for your help.
I’ll be able to take a closer look at her.

2 Likes

@Xavier
Good job! Status looks really good now! Jerry