2206 need help

Why is no working (Skylark)

Maybe wrong soft?

the ip addres is correct… then once in , go settings and put it on your net ( if you have one) …

I can’t open

you hav e a 2206 board… look:Dreamcatcher $99 - #47 by Syed

are you try to use skylark image with this board? for this board there is a github repository…above link.
hope this help

-8db signal good?

good enough I am at -7 and don’t have any packet loss and that’s what you are trying to avoid which is packet loss. Cant remember what the min signal strength number required for it to receive data successfully.

how long does it take to fully accept at least some file? 5 minutes, 2 hours? radio files will receive? aprs?

Doesn’t save packages to memory card

According to the UI, how much space is available on the SD card?

I used 32 and 8 gb.

Can you please take a screenshot of the available space on the SD card? This value is displayed in the UI.

Is there a way to switch the diseq port?
Need to switch the receiver to port 2.

I don’t understand. Could you please provide more details about the problem and your particular system?

I have a diseqc switch and port 1 has astra1 and port 2 has astra3.
So I have to switch on the receiver to port 2

The firmware can not do that yet, but the LNB driver can do it according to the datasheet. Should be as simple as sending the DISEqC B Position Select command.

Device no save to sd card

I thought bought a broken device

Max size of SD card it can use is 32gb and it has to be fat32 formatted