Issue with the LBN

Do I need a better power supply?this is what’s going on.

[ OK ] Bias-T is configured on: 0x08
[ OK ] Bias-T voltage is set to 13V
[FAIL] No/Very little current flowing on the Bias-T: Is your LNB connected? : 0x00
[FAIL] Bias-T Voltage out of range: check your power supply, cable shorts etc

Check your coax connections, including the one on the board. What are you using for a power supply right now?


Issue resolved. I was trying to use a usb battery. I ended up using a old power supply I bought for the pi3 it’s works great.

1 Like

I’m using pi 3 power unit, the phone chargers don’t give enough current. Also I have had issues on the pi with chinese cables which limit the power.