Lighthouse static IP Address

Othernet Software
41

outernet@outernetrx:~$ sudo facres
Password:

  • WARNING: *
  • This program will erase ALL DATA ON THIS DEVICE. *

Proceed with factory reset? [y/N] y
Stopping librarian: sh: can’t kill pid 1355: No such process
OK
Stopping monitoring: OK
Stopping ondd: rm: can’t remove ‘/var/run/ondd.pid’: No such file or directory

OK
Removing data: DONE
Rebooting…
outernet@outernetrx:~$
outernet@outernetrx:~$ Connection to 192.168.1.25 closed by remote host.
Connection to 192.168.1.25 closed.

42

Now your receiver is reset to factory defaults. See if you can get the interface that way. Also try flashing with this image:

https://archive.outernet.is/images/Lighthouse/3.1/outernet-rx-3.1.pkg

That’s the latest.

43

Loading user interface…

If interface does not appear to load for more than 10 minutes, you should restart the receiver.

44

How long has it been like that?

45

10 hours
I can not access the settings

46

It surely cannot be 10 hours since you did facres.

47 
sudo facres ? 15 minute
48

Hm… it seems like you might have bricked the device. Anyway, try reflashing with the latest firmware.

https://archive.outernet.is/images/Lighthouse/3.1/outernet-rx-3.1.pkg

49

8 hours

Download the boot.img file from the download link above.
Download the stable image from archive.outernet.is7.
Copy the both the .img file and .pkg file to an SD card, and rename the .pkg file to outernet-rx.pkg.
Power down Lightouse
Insert the SD card
Power up Lighthouse
When LEDs stop blinking, remove SD card
Power-cycle Lighthouse

50

this procedure?

51

Yes.

52

flashing OK
interface OK

thank you